How to Get a Toyota Replacement Key
If your Toyota key fob isn't operating properly, you may need a replacement battery. It's simple to open the case and insert a flat tool like a screwdriver. Replace the old battery with a new one after carefully taking out the old one.
While this isn't the complete solution however it can aid you in getting back on the road. If you have any concerns regarding our Key Replacement Protection that is included in our Tire and Wheel Protection plan, please contact us.
Getting a Replacement Key
We've all lost our keys. Sometimes, it's as simple as retracing your steps and checking places you usually set them. Other times, you may have a more serious problem like a key fob that's not working, or worse even lost completely. If your key fob isn't working it is likely to require an upgrade in battery or could need reprogramming. There are a few ways to purchase a Toyota replacement key fob for your car, truck or SUV.
First, determine if it is missing. If it's lost, you'll need to take an empty key to your local Toyota dealer and get it cut. You will also need to show proof of ownership, like your registration or insurance card. If you don't have these documents, the dealer will find your key code using the VIN number of the vehicle. This will stop thieves from hot-wiring the vehicle and then stealing it.
If you are unable to locate your key, try using an application to locate it. The Toyota Key Finder app is available for most of the most recent models from the brand, and it utilizes Bluetooth(r) technology to make your key emit a signal that's detectable by the application on your smartphone or tablet. The signal is sufficient to reach your phone, but it's not so strong that it could interfere with other devices at your home or office.
You can also bring your key fob to an electronics store or parts distributor to have it repaired. These places will often be capable of programming an entirely new key for your Toyota and will most likely have the part you need in stock. You may be required to show an identification document in addition, based on your location and the store's policies.
To ensure proper performance and fit, use OEM parts when replacing a Toyota Key Fob. It's a good idea to buy the part directly from the manufacturer because they're specifically designed for your specific model and year of vehicle, and they're safe to use. standards.
Replace the battery
It's possible to replace your battery if you feel your vehicle's battery has gone out of date or if you find that your key fob isn't responding as fast when you press the buttons. A new battery should eliminate the slowness and give your vehicle a better chance of starting even in the winter cold or after an overnight stay at a parking lot. Follow these simple steps to replace your battery.
Turn off the engine, set the parking brake and open the hood. The battery is typically mounted on a tray at the front of the engine compartment. There will be two terminals, one black (negative) and one red (positive) and where the cables are.
Use a wrench on the bolt that is tightening the negative cable connector at the terminal of the battery. Then, take the cable off and the terminal. Be careful not to drop the battery as it may rupture or leak. Place the battery in a safe location, making sure not to damage any electrical wiring or other components inside the engine bay.
Before you install your new battery, you must also spray an anti-corrosion solution on the battery terminals as well as the tray that holds the battery. This will prevent corrosion and ensure that the battery will last longer.
When you're ready to put in the new battery then find the clamp or mounting plate which secures it. The positive terminal on the battery must be connected to the positive terminal on the clamp or mount. Place the battery in the tray, then reattach the clamp or mount.
Repeat the procedure for the negative terminal of the battery. Use a wirebrush for cleaning the terminals, connectors, and clamps on the battery tray. Spray the anti-corrosion solution onto the negative and positive terminals of your battery to extend its life.
Replacing the Key Fob
The key fob allows you to unlock or lock your vehicle with just a press of the button. However, if the battery dies or the fob is damaged in any way, it could be difficult to get it working properly again. It's simple to replace the fob at home. Here's how:
The first step is to unplug your key from the fob. It is recommended to have a flat tool like screwdriver or a coin to open the case. Older Toyota fobs might have a detachable key that you can use to do this, whereas the latest models are designed to be opened by inserting the metal key into a notch on the case.
Once you have the case open, locate the circuit board and note where the battery sits in it (it's best to snap the photo using your smartphone to make a reference). Remove the old battery and replace it with a new one. It's important to use the exact kind of battery that your Toyota fob requires, so consult your owner's manual or visit our service center if you're uncertain about the type of battery you should purchase.
After you have put in the battery, take care to close the case and test your Toyota fob to confirm that it is working. If it doesn't work then open the case and double-check the battery's installation and that all connections are clean.
If everything is fine, you can drive your Toyota again with confidence! Contact our service department for assistance if your key fob isn't working after replacing it. G28CarKeys is here to assist you with all your automotive requirements! If you're looking for a key fob replacement or an upgrade to your transponder chip, we've got you covered. Contact us today to set up an appointment! We are looking forward to serving you.
Replace the Transponder Chip
Transponder chips can be found in a variety of modern vehicles. These chips communicate with the immobilizer system. This can prevent unauthorised access to and start of the engine. The transponder chip needs to be replaced when you lose your keyfob or if it ceases to function. This can be done at the dealership or by a professional locksmith. A professional locksmith is more likely to have the right tools for the job.
Find a blank Toyota Key and duplicate it at the local locksmith. They'll have the equipment to duplicate it for much cheaper than at the dealership. You'll need a master-key to program the new key. These keys can be purchased from the dealer, locksmiths or on the internet.
The chip in Toyotas is held by a split pin, that can only be reached using the key that is half-extended. Utilizing a screwdriver or whatever other method you have to cut away the plastic surrounding the inner key until you can reach the transponder. This can be a bit difficult but there are many videos on YouTube to guide you. Once the transponder has been removed, you can tape it temporarily. Then, put the key with the chip removed back into the housing and secure it down with a firm clamp. Use some super glue to seal the cuts if needed.
Insert the master key in the ignition cylinder but do not turn it. Release the gas six times within 20 minutes. The security light should blink and indicate that the key has been registered.
Replace the battery and test the key fob to ensure that it's working correctly. If it still doesn't work, open the case to check the battery and connections. If you're still struggling call a locksmith company that is specialized in automotive keys for a more reliable solution. USA Lock & Key is one of the companies that can offer fast and efficient Toyota key replacement services.